(In Office 2007, click the Office Button in the upper left corner and then click the Options button.)
In the left column, select the Save tab.
At the bottom, under Preserve fidelity when sharing this presentation, select the Embed fonts in the file check box.
Leaving that check box blank (or selecting Embed all characters in Office 2007) increases the file size, but is best for allowing others to edit the document and keep the same font.
Selecting Embed only the characters used in the presentation reduces the file size but limits editing of the file using the same font.
As I mentioned in a previous post I had my Dremel 3000 for about 3 years but in that time it had probably only had about 30 minutes use if that. This time it was a problem with the Shaft Lock, the button you press to stop the shaft turning so that you can remove or unlock the Collet/Chuck attachment. When I pressed the blue button the lock would slip as soon as I applied any turning force to slacken the Chuck/Collet.
Dismantling the Dremel, no difficult if you have done it once before. See my previous post for a link to the teardown or click here to see a YouTube video showing how to dismantle the Dremel 3000 and replace the Shaft Locking Pin. Please note the video refers to removing the screws that hold the body together but it does not mention that they are "Torx "screws.
I ordered the replacement parts on eBay from here.
Leaving that check box blank (or selecting Embed all characters in Office 2007) increases the file size, but is best for allowing others to edit the document and keep the same font.Selecting Embed only the characters used in the presentation reduces the file size but limits editing of the file using the same font.
