Use iPhone or iPad as a Laptop Remote Control

As I am going to be giving a few Powerpoint presentation in the near future. I thought I would explore the possibility of using my iPhone and or iPad as a Bluetooth remote control for my Windows 10 Laptop. Following the usual Google browse I eventually decided on  Unified Remote.

As is often the case with app's there is a FREE  and a paid for version. I tried the FREE version first and after adding the Slide Show Remote option  to the selection of Remotes, I found it worked extremely well.  There are a set of default Remote options and a selection of additional FREE ones to add and of course a range of PAID for Remotes as well.

You need to install the App on both Laptop or PC and your iPhone or iPad, which was painless in both cases. It will work with both WiFi and Bluetooth but I have only tested it with Bluetooth.

The most irritating bit was getting my iPad and my Laptop to talk to each other, but turned out I was not following the correct procedure!

Checkout the website here

Broken Earphone Jack Removal from iPad or iPhone

My iPad slipped off the bed the other day and landed on the earphone jack (Apple Earphones) snapping it off flush with the iPad case. The problem was now how to get the broken jack out of the socket? This is my fix.

There was the vestige of the centre core protruding but not enough to catch hold of. I discovered that the plastic remaining in the socket could be levered out with the tip of a craft knife or you could use a pin to remove the top plastic ring insulating ring of the jack left in the socket. For my fix to work you have to remove this bit of plastic. You maybe able to shake it out or hook it out with the bent tip of a pin.

Materials

• Pin
• Satay stick, wooden kebab skewer or similar piece of soft wood to fit in jack socket.
• Super Glue

For the next step I used a "Satay Stick", these are square ended wooden skewer/kebab sticks made from a softish bamboo used for Chicken Satay and the like. They are just the right size to fit in the socket hole. Removed the plastic ring to expose the central conductor for the jack, gently press and rotate the Satay stick to make a hole in the centre. Put the tiniest amount of Super Glue into the hole in the stick, dont let it get down the sides of the stick. If it does trim off and have another go. Carfull reinsert the stick into the hole and press for about 10 sec. give another 30 sec to make sure fully stuck and then pull stick straight out. With a bit of luck the result should look like the photo below.